You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 6987456123
Welcome to shootinggear.gr!
En
  • Your shopping cart is empty!

Maxx Model CNC hop up Chamber M4W for Wolverine MTW

  • Brand: MAXX MODEL
  • Product Code: MX-HOP010MW
  • Availability: In Stock

79.90€ Ex Tax: 64.44€

CNC Aluminum Hopup Chamber M4W unit is precisely machined to perform accurately and consistently on HPA MTW Milspec, Forged, Billet and MTW-9 series. The Hopup Chamber M4W unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot.

The Hopup Chamber M4W unit is designed to accept the HPA MTW Engine M4 nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use. The Hopup Chamber M4W unit is wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are optional)

Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting.

 

 Specification
product_right_arrow.pngOverall Length: 51.15mm
product_right_arrow.pngOverall Height: 22mm
product_right_arrow.pngInlet Adaptor Outer Diameter (to fit into HPA Nozzle Outlet): 11mm
product_right_arrow.pngHub Outer Diameter (to fit into Outer Barrel): 12mm
product_right_arrow.pngHub Inner Diameter (to fit Nozzle): 8mm
product_right_arrow.pngMaterial: Aluminum 6061
 Features
product_right_arrow.pngMachined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability
product_right_arrow.pngPerformed accurately and consistently on HPA MTW Milspec, Forged, Billet and MTW-9 series
product_right_arrow.pngPrecision Rotary Dial Knob for fine hopup adjustments
product_right_arrow.pngRe-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot
product_right_arrow.pngRemovable Steel Pivot Pin for ease of setup and maintenance
product_right_arrow.pngAccepted the HPA MTW Engine M4 nozzle length
product_right_arrow.pngFully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use
product_right_arrow.pngWisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are sold separately)
product_right_arrow.pngMounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots
product_right_arrow.pngIncluded an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting
product_right_arrow.pngEquipped with 2 compression springs on top and center to ensure the hopup unit is seated straight and air tight during use
product_right_arrow.pngCompatible with any 11mm inner bore HPA Engine nozzle outlets
product_right_arrow.pngThe Dual UV LED Tracer Module to glow BB in the dark ready!
 Usage
product_right_arrow.pngCompatible with most HPA MTW Milspec, Forged, Billet and MTW-9 series
 Requires
product_right_arrow.pngWearing eye protection is recommended
product_right_arrow.pngUse proper tools for disassembly and reassembly the gear box with great care due to spring tension
product_right_arrow.pngBearing lubricant oil/grease is recommended for smooth operation

 Includes
product_right_arrow.png1 x CNC Aluminum Hopup Chamber M4W unit
product_right_arrow.png2 x CNC Acrylic Side Cover
product_right_arrow.png2 x CNC Brass 2.6mm Side Wing
product_right_arrow.png1 x CNC Steel Pivot Pin
product_right_arrow.png1 x CNC Aluminum Hopup Lever
product_right_arrow.png1 x CNC Aluminum Soft Round Nub
product_right_arrow.png1 x CNC Aluminum Soft Flat Nub (4mm)
product_right_arrow.png1 x CNC Aluminum Hard Concave Nub (4mm)
product_right_arrow.png3 x Steel Nub Spring
product_right_arrow.png1 x CNC Steel Spring Guide
product_right_arrow.png1 x Steel Upper Compression Spring
product_right_arrow.png1 x Steel Center Compression Spring
product_right_arrow.png1 x CNC Delrin Locking C-Clip
product_right_arrow.png1 x CNC Brass Barrel Spacer
product_right_arrow.png1 x Brass Barrel Spacer Holder Oring
product_right_arrow.png1 x CNC Aluminum Rotary Dial Knob
product_right_arrow.png1 x CNC Aluminum Inlet Adaptor (OD11mm)

 Instruction Manuals are included

Write a review

Please login or register to review